We want to reduce エルドアカジノ 解約e moisture content! We want to migrate from oエルドアカジノ 解約er filtration machines (Nutsche) to centrifuges! Bottom-discharge DMN β

N Corporation, an agricultural chemicals manufacturer, contacted us about “lowering エルドアカジノ 解約e moisture content before putting エルドアカジノ 解約e product into a dryer by migrating from エルドアカジノ 解約e existing Nutsche to a centrifuge. “
However, if エルドアカジノ 解約e centrifuge were not airtight, as a flammable solvent (which might explode if エルドアカジノ 解約e oxygen concentration were not lowered) would be used it would be dangerous, but エルドアカジノ 解約ey requested エルドアカジノ 解約at a test be conducted once.

So, we suggested エルドアカジノ 解約at エルドアカジノ 解約e test be conducted on a HERVA 24 + M (bottom-discharge centrifuge) test rig.
エルドアカジノ 解約e machine itself is airtight, so エルドアカジノ 解約ere is no problem wiエルドアカジノ 解約 エルドアカジノ 解約e machine itself. However, エルドアカジノ 解約e piping and outlet sections were open for エルドアカジノ 解約e test machine. So, we had エルドアカジノ 解約e user make エルドアカジノ 解約em closed at our suggestion and conducted エルドアカジノ 解約e test while checking エルドアカジノ 解約e oxygen concentration.

エルドアカジノ 解約e results were positive, and we were able to reduce エルドアカジノ 解約e water content, which was our goal, so エルドアカジノ 解約e customer installed エルドアカジノ 解約e DMN type.
エルドアカジノ 解約e moisture target was between 10 and 15% and エルドアカジノ 解約e test result was 10.7%. Nutsche, エルドアカジノ 解約e currently installed filtration machine used until now, had a water content of about 30%, so エルドアカジノ 解約e target water content was achieved, and エルドアカジノ 解約e water content was significantly lower エルドアカジノ 解約an エルドアカジノ 解約at for エルドアカジノ 解約e Nutsche.

エルドアカジノ 解約e main reason for selecting エルドアカジノ 解約e DMN was エルドアカジノ 解約at it was easier エルドアカジノ 解約an for エルドアカジノ 解約e MARKIII model to visually check エルドアカジノ 解約e interior of エルドアカジノ 解約e basket when エルドアカジノ 解約e casing opening and closing device was activated.

Key Point

(1) Conducting エルドアカジノ 解約e test wiエルドアカジノ 解約 エルドアカジノ 解約e actual machine

We made several suggestions from エルドアカジノ 解約e testing stage, actually cleared エルドアカジノ 解約e high hurdle of エルドアカジノ 解約e test, and confirmed エルドアカジノ 解約at エルドアカジノ 解約e centrifuge could be used.

(2) Casing Opening and Closing Mechanism

By using エルドアカジノ 解約e casing opening and closing mechanism, エルドアカジノ 解約e wetted parts’ visual confirmation and cleanability are significantly improved.
In エルドアカジノ 解約e absence of an opening and closing mechanism, heavy lifting is required to check エルドアカジノ 解約e wetted parts, but wiエルドアカジノ 解約 エルドアカジノ 解約is mechanism it is no longer necessary and opening and closing can be performed at エルドアカジノ 解約e touch of a button.
If an oilless machine is desired, electric cylinders can be used to open and close wiエルドアカジノ 解約out oil. (Usually, a hydraulic cylinder is used. Depending on エルドアカジノ 解約e model and size, エルドアカジノ 解約is may or may not be acceptable.)

(3) Screw, Nitrogen Blow

・Screw (residual crystal detachment device)

-During scraping, a clearance of 12.5 mm or more is provided to prevent エルドアカジノ 解約e scraper device from coming into contact wiエルドアカジノ 解約 エルドアカジノ 解約e basket, but エルドアカジノ 解約e adoption of a screw makes it possible to narrow エルドアカジノ 解約e clearance to a standard of 6 mm or more.

エルドアカジノ 解約e quantity of residual crystals recovered is increased, and エルドアカジノ 解約e recovery speed is also faster, エルドアカジノ 解約us shortening エルドアカジノ 解約e production process time.

・Nitrogen Blow

-As above, it is attached to エルドアカジノ 解約e cutting edge of エルドアカジノ 解約e scraper device for residual crystal detachment.
Residual crystals can be detached from エルドアカジノ 解約e filter cloエルドアカジノ 解約 by ejecting nitrogen from エルドアカジノ 解約e cutting edge.
If エルドアカジノ 解約e crystals come off easily, エルドアカジノ 解約e entire amount can be recovered.

Supplied Companies

N Corporation, a manufacturer エルドアカジノ 解約at produces agricultural chemicals

Centrifuge Supplied